\\r\\n
BGM PRO air filter by Marchald- for Polini CP type carburettors Ø17.5-19-21-23-24mm, CS Ø=46mm, L=55mm...
Air filter MARCHALD Double Layer Vortex- Ø=52mm
Extra narrow/thin air filter 40mm deep. comes with a selection of adaptors to fit most carburettors....
Extra narrow/thin air filter 40mm deep. comes with a selection of adaptors to fit most carburettors....
NEW DESIGN! Casa Performance 'PowerFlow' internally-reinforced blue foam type airfilter for large carbs...
Free fast flow air filter for all series 1 and 2.
20mm air hose with Ram filter & clips Will fit - Dellorto SH18/20, Dellorto PHBL 25mm CARBS
22mm air hose with Ram filter & clips Will fit - Dellorto SH22, Mikuni 24/25 cARBS
Viton 20mm (gp125) PHBL25 air intake hose. this hose is made in viton rubber which is more fuel resistant...
22mm (gp200/gp150) air intake hose for models with the SH22 carb. Also fits Jetex 22/26 . Casa B39
Viton 22mm (gp200/gp150) air intake hose for models with the SH22 carb. Also fits Jetex 22 this hose...
Air hose clip that fits the bottom of the air hose bellows rubber when using a standard 18/20mm carb...
Complete Series 1 & 2 air hose with clips, cup, pipe & valve.
Air hose bottom spring clip that holds the cup at the bottom of the air hose in place for series 1,2...
Casa Lambretta series 1 frame breather air hose. Casa B22
Air hose valve that fits Series 1,2 and 3 scooters in stainless steel..
Casa Lambretta series 1 frame breather rear intake rubber hose.
Airbox square bolt.. the bolt that fits in the frame that holds the air box in place.... c/w nut and...
Air filter elbow spring clip for series 2,3 & Gp/Dl scooters.. Casa B269
Air filter elbow spring clip for series 2,3 & Gp/Dl scooters....
Air Filter from BGM for Series 1 & 2 Lambrettas, it has a fine wire mesh to filter the air. It allows...
Bgm 45mm air intake hose and Marchald foam air filter ..... to fit carburettor: 45 mm (e.g. Dellorto...
Bgm 50mm air intake hose and Marchald foam air filter. to fit carburettor: 50 mm (Keihin PWK 28, Polini...
PHBH Bgm 42mm air intake hose and Marchald foam air filter . to fit carburettor: 42 mm (e.g. Dellorto...
Bgm 40mm air intake hose and Marchald foam air filter ..... to fit carburettor: 40 mm (e.g. Dellorto...
BGM fuel hose. Clear anti kink hose.... Sold by the foot or multiples of 1 foot lengths....
Gasket for Dellorto MA series 1 & 2 carburettor float bowls. Casa 501
SH1/18 & 20 slide 5914-1 for models LI125, 150 Special, TV175, TV200 SX200 & Vega 75 will fit both Dellorto...
Throttle cable adjuster rubber, this is for standard dellorto SH and Jetex carbs....
SH18 & 20 Carburettor Sleeve Plastic Insert.
Carburettor Sleeve Plastic Insert for Dellorto and Scootopia SH2/22 type carbs.
Choke wire cable quide series 1/2 & 3 (early models only) in black steel ..
Choke Lever Assembly for series 1 & 2 as per original....
Choke lever metal cap that sits at the rear of the choke unit..for all series 3, Gp/Dl and series 2,...
Choke lever metal cap in stainless steel that sits at the rear of the choke unit..for all series 3, Gp/Dl...
CNC induction collar in black for large bore carburettors such as Dell'Orto VHS 34mm-39mm, Mikuni TMX...
CNC induction collar in red for large bore carburettors such as Dell'Orto VHS 34mm-39mm, Mikuni TMX 35mm,...
CNC induction collar in blue for large bore carburettors such as Dell'Orto VHS 34mm-39mm, Mikuni TMX...
CNC induction collar in silver for large bore carburettors such as Dell'Orto VHS 34mm-39mm, Mikuni TMX...