Categories
SERIES 3 & Gp/DlSERIES 1 & 2LUI / VEGA/JLUNATUNESBGM PRODUCTSMB PRODUCTSQUATTRINISCOOTOPIA PRODUCTSCASA LAMBRETTA PRODUCTSCASA PERFORMANCEGRANTURISMO PRODUCTSSIP PRODUCTSDELLORTOJOCKEY`S BOXENSTOPOIL SEALSCYLINDER KITS & TOP ENDCRANKSBODY WORKCABLE & CONTROLSGASKETSTOOLSSHIMS & CIRCLIPSEXHAUSTSSEATS & COVERSOILS & SEALANTSBEARINGSWHEELS, TYRES, TUBES & RIMSCARBURETTOR, JETS & SPARESSTUDSBOOKSRACKS & ACCESSORIEST SHIRTSFIXINGSFIXING KITSBULBS & CONNECTORSREBUILD KITSLD DVESPA
Store Links
Crankshaft and Layshaft spacer shim, 25mm ID, 1.5mm, MB
MRB0619M15 F5
£1.98
Crankshaft and Layshaft spacer shim, 25mm ID, 1.5mm, MB Summary
1.5 Crank shim 1.5mm to fit on the crankshaft between the crank and drive bearing, it will space the crank away from the drive plate which sometimes can catch.
It also will space up the layshaft if fitted between the layshaft and bearing to tighten the main gear shim if there is a big gap when shimming the end plate..
It also will space up the layshaft if fitted between the layshaft and bearing to tighten the main gear shim if there is a big gap when shimming the end plate..
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
No Reviews Posted Yet - be the first!(write review)
Recently Viewed Products
Crankshaft and Layshaft spacer shim, 25mm ID, 1.5mm, MB
1.5 Crank shim 1.5mm to fit on the crankshaft between the crank and drive bearing, it will space the...
14T front sprocket for Lambretta J50 + Lui 50 models + tuning
X28a 14T front sprocket for Lambretta J50 + Lui 50 models (+ tuning). This is the complete list of all...
Flywheel Side Needle Bearing Lui J range
Crankshaft flywheel side 3 piece needle bearing for all later production Lui, Vega, Cometa and J Range...
Drive Sprocket Sleeve Extracting Pulling Tool, MB
Drive Sprocket Sleeve removing pulling tool. re-made by MB Scooters. Works on Series 1, 2 and 3 moto...
